EARLY ACCESS BANNER EARLY ACCESS BANNER
Vac110 VacFriday Banner Vac110 VacFriday Banner

JVR Vac610 – 3-Phase Dual Chamber Vacuum Sealer

 

The JVR Vac610 – 3-Phase Dual Chamber Vacuum Sealer, is built to exceed expectations. Highly functional and built for speed with a high flow 100m3/h vacuum pump!  24″ seal bars provide ample room to seal large items or multiple small items all at once.  The Vac610, chamber vacuum sealer was built for speed and efficiency.  

The 7.5″ maximum chamber height provides ample room for sealing high-profile products and the extra-wide, 10mm seal wire, is a unique feature for a machine at this price point.  At the heart of every vacuum sealer is the vacuum pump and the Vac610 is equipped with one highly efficient and high-flow vacuum pump.  With a flow rate of 100m3/h, this beast of a machine is capable of removing 99% of the air in under 15 seconds! Every unit is tested and we ensure it pulls a minimum vacuum of 29.8″ Hg (5 Torr). We guarantee the JVR Vac610 will not disappoint and will exceed your expectations.

 

NOTE: The Vac610 requires a 220-volt, 3-phase power supply.

VacSeries Models Vac610 [3 PH] Vac610 [1 PH]
Machine Size

(W, D, H)

57.5″ x 27.5” x 38.5“ 57.5″ x 27.5” x 38.5“
Chamber Size

(W, D, H)

26.3″ x 21.5” x 7.5“ 26.3″ x 21.5” x 7.5“
Heat Strip Width 10mm 10mm
Seal Bar Length  24″ (x4)  24″ (x4)
Seal To Seal (L) 17.5″ 17.5″
Machine Weight 630 lbs 540 lbs
Amperage 13 Amps max 16 Amps max
Voltage 220V / 3ph / 60Hz 220V / 1ph / 60Hz
Vacuum Pump Capacity 100m3/h flow rate  

24m3/h flow rate (x2) = 48m3/h flow rate

 

Specifications are subject to change without notice.

Package Contents:

Quart of Oil (VacOil)

Funnel

4 – Heat Strip Replacement

4- Seal Bar Tape Replacement

4 – Filler Plates

Features:

Stainless Steel Construction

Four 24″ seal bars

Fast cycle times

Simple digital controls

High flow 100m3/h vacuum pump

Toolless seal bar removal

10mm extra-wide seal wire

  • Reviews
  • Q&A
0.0
Based on 0 reviews
5
0%
4
0%
3
0%
2
0%
1
0%
0 of 0 reviews

Sorry, no reviews match your current selections

Q & A

Ask a question
You must be logged in to ask a question Log In
**Q:** Where are these machines made? Bill Cort asked on March 20, 2024

**A:** So, this is quite a dense subject, but the simple answer is our product is made in China, but it is rigorously tested and inspected in Lancaster, NY by one of our experienced technicians.

Every unit is pulled out of the box and reviewed for vacuum leaks, control board functionality, aesthetics, full vacuum draw using an atmospheric pressure gauge, and more. Our units are based off of a rudimentary design in China, but our lead experts created a proprietary design for our units.

JVR Industries has been in the business since 1972. So, we know a thing or two about vacuum packaging. Our service techs still service units that are 20+ years old! We plan on servicing our JVR VacSeries for the same amount of time! Our business carries multiple lines of units. We rebuild $100K units called rollstock thermoformers and we even recondition Busch vacuum pumps in-house! We have distributed multiple lines of vacuum sealers from several origins including, but not limited to, Germany, Canada, Europe, and China. We believe our commercial service history is what sets us apart from any other company in the market.

JVR Industries Inc. answered on March 20, 2024
(0) (0)
Add an answer
You must be logged in to answer a question Log In
Where are these machines made? Bill Cort asked on March 20, 2024

So, this is quite a dense subject, but the simple answer is our product is made in China, but it is rigorously tested and inspected in Lancaster, NY by one of our experienced technicians.

Every unit is pulled out of the box and reviewed for vacuum leaks, control board functionality, aesthetics, full vacuum draw using an atmospheric pressure gauge, and more. Our units are based off of a rudimentary design in China, but our lead experts created a proprietary design for our units.

JVR Industries has been in the business since 1972. So, we know a thing or two about vacuum packaging. Our service techs still service units that are 20+ years old! We plan on servicing our JVR VacSeries for the same amount of time! Our business carries multiple lines of units. We rebuild $100K units called rollstock thermoformers and we even recondition Busch vacuum pumps in-house! We have distributed multiple lines of vacuum sealers from several origins including, but not limited to, Germany, Canada, Europe, and China. We believe our commercial service history is what sets us apart from any other company in the market.

JVR Industries Inc. answered on March 20, 2024
(0) (0)
Add an answer
You must be logged in to answer a question Log In

Why Buy Your Product From JVR Industries?

Every chamber vacuum sealer in the JVR VacSeries line undergoes a thorough and rigorous quality inspection right in Lancaster, NY. Each chamber vac is tested for full vacuum draw, proper control board functionality, vacuum leaks, & more! Our 50+ years of experience is used in ensuring your future chamber vacuum sealer meets a high standard of performance before it leaves our facility.

Frequently Asked Questions       |        Returns & Refund Policy        |         Shipping Policy

 

 

Team Member

What makes our Sales Experts great?

JVR Industries Sales Experts can break down 50+ years worth of vacuum packaging knowledge into an easy to understand language.
We can help you compare models within our VacSeries or even against our competitors. Our Sales Experts will cover every base of what truly sets us apart: Our customer support, knowledge, and same-day diagnosis!
(716)206-2500